Toro Recycler 22 Manuel De L'utilisateur page 12

Operating the Bag-on-Demand Lever
The bag-on-demand feature allows you to either collect
or recycle grass and leaf clippings while the grass bag
is attached to the mower.
• For bagging the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure 20).
Figure 20
1. Bag-on-demand lever (in bagging position)
• For recycling the grass and leaf clippings, press the
button on the lever and move the lever rearward
until the button on the lever pops up.
Important: For proper operation, remove any grass
clippings and debris from the bag-on-demand door
and the surrounding opening (Figure 21) before you
move the bag-on-demand lever from one position
to another.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury. Also, an open rear
discharge area could allow small stones and other
similar debris to be thrown in the operator's or
bystander's direction and result in serious personal
injury or death to the operator or bystanders.
Stop the engine and wait for all moving parts to
stop before cleaning the bag-on-demand door and
the surrounding opening.
1. Bag-on-demand door
(open; in bagging position)
Side-discharging the Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the mower and the bag-on-demand
lever is in the bagging position, move the lever
to the recycling position (refer to Operating the
Bag-on-Demand Lever).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Side Discharge Chute
Lift up the side deflector and install the side discharge
chute (Figure 22).
12
Figure 21
2. Bag-on-demand door
(closed; in recycling or
side-discharging position)