Tanita innerScan RD-953 Manuel D'utilisation page 8

Analyseur de composition corporelle bi-fréquence avec la technologie bluetooth intégrée

Masquer les pouces Voir aussi pour innerScan RD-953:

Les langues disponibles

Setting (Resetting) Date and Time

1. Set Date

While the power is off, press the

Press the

buttons to set year and then press the

Set the month and date in the same way.

Note:

・When the power is switched on for the first time, the date and time

setting screen can also be displayed by pressing the

・When you have replaced the batteries, the date and time setting

screen can also be displayed by pressing the

2. Set Time

Press the

buttons to set hour and then press the

Set the minutes in the same way.

The set date and time are displayed in order, and then the power automatically turns off.

Note:

・If the Body Composition Monitor is not operated for 60 seconds or more,

the power will turn off automatically. Settings will not be saved in this case.

・If you make a mistake or wish to turn the monitor off before you complete the settings,

press the

button to turn the monitor off. Settings will not be saved in this case.

・To change the date or time settings, press and hold the

when the power is off, and then follow the procedure above to change the date or time settings.

button to start setting.

button.

buttons.

button.

button for 3 seconds

(Not required if connection to the smartphone is complete)