Tanita innerScan RD-953 Manuel D'utilisation page 23

Troubleshooting
If the following problems occur, follow the instructions below.
"Lo" appears on the display.
Check the orientation of the batteries, and insert them correctly.
The batteries are running low. Replace the batteries promptly.
Refer to page 6.
"OL" appears on the display during use
The maximum weight (weighing capacity) 200kg is exceeded. (Measurements cannot be taken)
"Err" appears on the display after measurement
Are the personal data settings correct?
Did you select the wrong personal data number?
Measurement items have exceeded the measurement range. (Measurements cannot be taken)
Cannot measure body composition even though personal data is set
The personal data settings are not complete. You need to measure body composition once immediately after entering the personal
data.
Cannot connect my smartphone to the Body Composition Monitor
"Err pair" or "Err DATA" appears on the display
Are batteries inserted correctly in the Body Composition Monitor?
Are the batteries running low?
Are the smartphone and body composition meter within communication range?
The communication range for The Body Composition Monitor is 5m in an unobstructed location.
Is the "Bluetooth" setting in the smartphone "Settings" turned on?
"Err pair" appears repeatedly.
Delete the pairing information from "Settings" > "Bluetooth" on the smartphone, and pair the smartphone with the Body Composition
Monitor again.
"Err UUID" appears repeatedly.
Delete the pairing information from "Settings" > "Bluetooth" on the smartphone, and pair the smartphone with the Body Composition
Monitor again.
"Err c9" appears on the display
Remove and replace the batteries from the body composition meter, and set the date and time again.
The date and time settings have been changed
When using the Body Composition Monitor linked with an smartphone, the date and time settings on the Body Composition Monitor
are overwritten with those from the smartphone.
The "Input Data" button in the app does not work
Is the "Bluetooth" setting in the smartphone "Settings" turned on?
Linking between the app and the Body Composition Monitor is only enabled when the Body Composition Monitor is turned off.
Check that the power of the Body Composition Monitor is turned off and try again.
en
23