Tanita innerScan RD-953 Manuel D'utilisation page 10

en
Setting and Storing Personal Data in the Memory
5. Measuring Your Body Composition
Check "0.00kg" (0.0lb, 0.0stlb) is shown on the display, then step on the monitor.
Registered personal data and the measurement results are displayed in order, then the
power switches off automatically.
Note:
If you step onto the monitor before 0.00kg is displayed, "Err,-OL" is displayed and the power
turns off. Set the personal information again.
Also, if you do not step onto the monitor within 60 seconds of "0.00kg"(0.0lb, 0.0stlb) appearing,
the power turns off automatically. In this case, you need to set and store personal data again.
Note:
The monitor needs to be connected to the smartphone in order to use the dedicated app.
Connect to the smartphone, and register the Body Composition Monitor as shown in the instructions on P.7.
If you change the birthday and/or gender, "CLr" is displayed on the monitor.
Select "YES" using the
data enabling you to register new data.
If you select "no" using the
(existing data is left unchanged) and power turns off.
10
buttons and then press the
buttons and then press
button, to delete the existing personal
button, no new data is saved