Publicité
Les langues disponibles
Les langues disponibles
Unit locks up and no communication between the base and
cordless handset
• Unplug the power adaptor from the electrical outlet and
the back of the base. Remove the handset battery. Wait
for 0 seconds and plug the power adaptor back into the
base and electrical outlet. Reconnect the battery and
charge for 16 hours.
Caller ID Solutions
No Display
• Charge the battery (for 16 hours). Or replace the battery.
• Make sure the unit is connected to a non-switched
electrical outlet. Disconnect the power adaptor from the
base and reconnect it.
Caller ID Error Message
• The unit displays this message if it detects anything other
than valid Caller ID information during the silent period
after the first ring. This message indicates the presence of
noise on the line.
No Caller ID
• You must be subscribed to the standard Name/Number
Caller ID service from your local telephone company to
receive CID information.
All manuals and user guides at all-guides.com
Publicité
