GE 29115 Serie Mode D'emploi page 35

. Use the touch-tone pad to enter the selection, or use the
caller ID-volume ( 5 or 6) button to scroll to the 1ON or
2OFF. The default setting is 2OFF.
. Press the mute/program button to confirm. You will hear
a confirmation tone and the new setting shows in the
display.
Rings to Answer (for answering system)
This feature lets you select the number of times you want the
phone to ring before the answering system answers a call.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the
RING TO ANSWER sub-menu.
. Press mute/program button to enter the menu. RING TO
ANSWER 3 4 5 6 TS shows in the display.
. Use the caller ID-volume ( 5 or 6) button to scroll to the
your selection. The default setting is 5.
. Press the mute/program button to confirm. You will hear
a confirmation tone and the new setting shows in the
display.
NOTE: If you select Toll Saver (TS) the unit
answers after the 3rd ring if there are NEW
messages, OR the unit answers after the 5th
ring if there are NO new messages. This allows
user to access their answerer from another
location and then hang up after 4 rings to save
long distance charges.
All manuals and user guides at all-guides.com
5