GE 29115 Serie Mode D'emploi page 23

Voice Instruction
If you need additional assistance, press the review button in
standby mode and follow the voice instructions.
Recording the Outgoing Announcement
For best results when recording, you should be about
nine inches from the microphone, and eliminate as much
background noise as possible.
You may record an outgoing announcement in the
answerer or choose the default for your current outgoing
announcement.
1. Make sure the answering system is ON.
. Press and hold the announce button until the speaker
announces "RECORD ANNOUNCEMENT AFTER TONE".
. Begin speaking after you hear the beep.
. Release the button when you finish your announcement.
NOTE: If you choose not to record an outgoing
announcement, a default announcement plays
instead. To return to the default announcement
after you have recorded your own outgoing
announcement, press the announce button and
release it when you hear the beep. Or, press
the delete button while the announcement is
reviewing.
All manuals and user guides at all-guides.com