Publicité
Les langues disponibles
Les langues disponibles
GB Rear rack BIKE TWO for trailer coupling, for 2 bicycles with EU operating permit
Item number 11411
Not suitable for use with aluminium trailer couplings
D-value at least 7.6 kN
Supporting load
Dead weight
50 kg
15 kg
60 kg
15 kg
75 kg
15 kg
Overview
Introduction
Intended purpose
Specifications
Safety notes and important information
Operating instructions
Maintenance
Contact information
Introduction
Thank you for choosing the BIKE TWO bicycle rack from Eufab.
WARNING
Please read the operating instructions carefully prior to use and observe all safety instructions!
Retain the original packaging, the proof of purchase as well as these instructions for subsequent reference!
Non-compliance can lead to personal injuries, damage to the device or your property!
Please check content of package for integrity and completeness prior to use!
Intended purpose
Transportation of two bicycles on the trailer coupling.
Specifications
Not suitable for use with aluminium trailer couplings
D-value of the trailer coupling must be at least 7.6 kN
Size (L x W x H):
approx. 147 x 70 x 44 cm
Weight:
15 kg
Maximum payload:
35 kg (with a permitted supporting load of 50 kg)
40 kg (with a permitted supporting load of 60 kg)
40 kg (with a permitted supporting load of )
Safety notes and important information
•
The ball surface of the trailer coupling must be clean, grease-free and free from any paint.
•
The bicycle rack will only be seated properly on the coupling when secured and driven for a few kilometres. For this reason, check the fixture
again for correct seat and adjust the fixture if necessary.
•
Check the bicycle rack for damages before use. Damaged or worn parts must be replaced immediately. Only original replacement parts may
be used.
•
Modifications to the bicycle rack are generally not permitted (mechanical or electrical). This can be very dangerous. Guarantee claims will no
longer be accepted and we can no longer guarantee the correct functioning of the bicycle rack if modifications have been made. We are not
liable for any damages caused as a result of incorrect installation, operation or modification.
•
Check the lighting of your bicycle rack regularly to ensure correct functioning.
•
Make sure that the bicycles are always secured using the frame holder and the wheel tensioning straps. The frame holder should be closed
during transportation.
•
Make sure that no parts of the bicycle can be lost (batteries, e-bike battery packs, bicycle pump, tachometer, baskets, saddles etc.). Remove
•
these parts before transporting the bicycle!
•
Check all tensioning straps and holders of the bicycle rack for secure seating and tighten if required.
•
Do not cover the bicycles using tarpaulins, covers or similar.
•
The bicycle rack will affect the behaviour of your vehicle. Adapt your driving speed to these circumstances (maximum of 130 km/h). Avoid
sudden steering and control motions.
•
When reversing, remember that your vehicle is longer than it would normally be!
•
The legal regulations and directives for the transportation of goods on your vehicle apply.
•
If your vehicle has a parking assistant, the mounted bicycle rack may result in faulty operation. Deactivate the parking assistant function
when the bicycle rack is mounted.
•
If your vehicle is fitted with a tailgate that opens automatically, this should be deactivate or only opened manually when the bicycle rack is
•
mounted
All manuals and user guides at all-guides.com
Payload
35 kg
Maximum 40 kg
Maximum 40 kg
Page 5
Page 5
Page 5
Page 5
Page 6
Page 8
Page 8
5
Publicité
