Publicité
Les langues disponibles
Les langues disponibles
output, without going through the Display's sound
processing procedures.
Reset to Default Values
Reset: Highlight this option and press the OK button
on the remote to return the Options menu settings to
factory defaults.
First time installation
Highlight this option and press OK to repeat the initial
setup process and reset the Display's settings to the
factory defaults.
System Settings
Language: Set your OSD menu language preference.
Date/Time: Set the date and time options of your
Display.
Automatic date & time: You can set your Display to
automatically update the time and date data over the
network. Turn this option off, if you want to manually
set the date and time.
Set date: Set the date manually.
Set time: Set the time manually.
Set time zone: Set the time zone.
Use 24-hour format: Turn the 24-hour format on
or off.
Sources:
Enable or disable selected source options.
There will be Disabled, Enabled, and Enhanced options
available for HDMI sources, if your Display supports Ultra
HD. The Enabled and Enhanced options are affecting the
colour settings of the selected HDMI source. To be able
to watch 4K images from an HDMI source related source
setting should be set to Enhanced if the connected device
is HDMI 2.0 compatible. Set to Enabled if the connected
device is HDMI 1.4 compatible. Set accordingly or disable
the related HDMI source by setting to Disabled.
Note: HDMI cables which are longer than 5 metres and which are
not HDMI certified can cause display problems. We recommend
using a certified Premium High-Speed HDMI Cable. Source
device, connection cable quality and other HDMI equipments
used may affect performance.
Please refer to → https://www.hdmi.org/resource/cables (for
finding the right cable)
More
Menu Timeout: Set your idle timeout duration
preference for the menus.
Standby Mode Led: Enable or disable the
functionality of the standby mode LED. If set to
Off the standby mode LED will not light up when
the Display is in standby mode.
Software Upgrade: Ensure that your Display has
the latest software. Press OK to see the current
software version and last update time. The CHECK
UPDATE option will be highlighted. You can start
a manual search for an update by pressing OK.
To do this, your Display should be connected
to the Internet. If any update is found, you can
download and install the new software using the
related options. Follow the on-screen instructions
to complete the process.
Country: The country that was selected during the
initial setup process will be shown.
Auto Display OFF: Set your time preference for the
Display to automatically go into standby mode when
not being operated. This option can be set from 1
to 8 hours in steps of 1 hour. You can also disable
this option by setting to Off.
CEC: Enable or disable the CEC functionality.
Highlight the option of your choice and press OK
to set.
CEC Auto Power On: This function allows the
connected HDMI-CEC compatible device to turn
on the Display and switch to its input source
automatically. Highlight the option of your choice
and press OK to set.
USB Auto Play: Using this option you can set your
Display to start playing the media content installed
on a removable device automatically. Refer to USB
Auto Play Feature section for detailed information.
Installing Third Party
Applications
Check if the installation of apps from sources other
than the Play Store is allowed in the the operating
system's Settings > Apps > Permissions > Security
& restrictions menu. If the checkbox next to the Un-
known sources option is not checked, highlight this
option and press OK. Then follow the below mentioned
steps in order to install a third party application. Refer
to the Operating System Settings Menu Content
section if you need further information.
• Copy the file with the extension ".apk" onto a FAT
formatted USB storage device
• Connect the USB storage device to one of the USB
inputs on the Display.
• Launch the File Manager app from the All Apps
menu. Select your connected USB storage device
and press OK to browse the content. Highlight the
file with the extension ".apk" and press OK. Your
permission will be asked. Select Install and press
OK again to proceed.
Note: Third party applications support is limited. Some
functions of the application or properly launch may be affected.
Connectivity
To configure wired and wireless settings you should
access the Display Settings > Network & Internet
menu. Press the Menu button on the remote, tap
English - 22 -
Publicité
