Kimex 160-4075T Manuel D'utilisation page 110

SETOPSPOWER
GETOPSPOWER
SETOPSALWAYSON
Command
SETBACKLIGHT
SETBACKLIGHTLEVEL Set backlight level.
GETBACKLIGHTLEVEL Get backlight level.
COLOURTEMP
GETCOLOURTEMP
PICTUREMODE
GETPICTUREMODE
GETCONTRAST
Set OPS power status
Get OPS power status
Set OPS Always on
value
PICTURE COMMANDS
Description
Set backlight pin status.
Set colour temperature.
Get colour temperature.
Select picture mode.
Get picture mode.
Get picture contrast
value.
English - 42 -
string parameter "on"
or "off"
no parameter
string parameter "true"
or "false"
Parameter
str-int n (n = ON, n =
OFF)
int n (0 ≤ n ≤ 100)
no parameter
str-int n (n = normal,
warm, cool)
no parameter
Display ----> int n (1 =
dynamic, 2 = natural, 3
= cinema, 4 = game, 5
= sport)
Signage ----> int n (1 =
signage, 2 = natural, 3 =
text, 4 = game, 5 = sport)
no parameter
no parameter
#*Turning OPS on
#*Turning OPS off
#*The OPS is already on
#*The OPS is already off
#*The OPS is not enabled
#*The OPS is not plugged
in
#*invalid value entered
#*The OPS is on
#*The OPS is off
#*The OPS is not enabled
#*The OPS is not plugged
in
#*invalid value entered
#*The OPS is not enabled
#*OPS Always on set
as true
#*OPS Always on set as
false
Return
#*setBacklight port to ON
or
#*setBacklight port to OFF
#*Backlight level set to n
or
#*NACK
#*The backlight level is ...
#*setColourTemp() set
to n
#*Colour temp is ...
#*setPictureMode() set
to n
or
#*Incorrect picture mode
parameter entered
#*Picture Mode is ... for
current source
#*THE CONTRAST
VALUE : ...