Publicité
Les langues disponibles
Les langues disponibles
AVL: With this option, you can set the Display to auto-
matically level out sudden volume differences. Typically
at the beginning of adverts or when you are switching
sources. Turn this option on/off by pressing OK.
HDMI/ARC latency: Adjust the delay value for HDMI/
ARC.
Audio Output Latency: Adjust the delay value for
SPDIF.
Reset: Reset the sound settings to factory default
settings.
Network & Internet
You can configure your Display's network settings
using the options of this menu.
Wi-Fi: Turn the wireless LAN (WLAN) function on
and off. Highlight and press OK to turn this function
on and off.
Available networks
When the WLAN function is turned on, a few available
wireless networks will be listed. Highlight See all and
press OK to see all networks. Select one and press OK
to connect. You may be asked to enter a password to
connect to the selected network, in case the network
is password protected.
You can see the status of the connection under the
name of your network. It will read 'Connected' if the
connection is successful. Highlight the network that
your Display is connected to and press OK to see the
information on the connection, such as the Internet
connection status (as Connected - Not connected),
and if connected, the IP/MAC addresses and signal
strength. You can also set a proxy server, change the
IP settings using the related options and delete the
connected wireless network profile using the Forget
network option here.
Note: The IP Setting changes will not take immediate effect
but becomes active after the Display is turned off and then
back on again.
Other Options
Add new network: Add networks with hidden SSID's
(network name). You can use this option in order to
connect to the hidden networks by entering their names
manually. This item will not be available if the Wi-Fi
option is not turned on.
Networked Standby Mode: This is a standard
that allows a device to be turned on or woken up
by a network message when it is in standby mode.
Highlight and press OK to turn this function on and
off. Refer to Networked Standby Mode section for
more information.
Ethernet
Under the Ethernet caption, you can see the LAN
status (as Connected - Not connected) and also
MAC/IP addresses if connected. You can also set a
proxy server, change the IP settings, and use your
Display as a hotspot using the related options.
Connected/Not connected: Displays the status of
the connection (via Ethernet), IP and MAC addresses.
802.1x Settings: Configure your Display's Ethernet
port settings.
Proxy settings: Set a HTTP proxy for browser
manually. This proxy may not be used by other apps.
IP settings: Configure your Display's IP settings.
Hotspot settings: Enable or disable the hotspot
function and configure the related settings of your
Display. The Display should be connected to a network
via Ethernet cable to use this functionality.
Note: The IP Setting changes will not take immediate effect
but becomes active after the Display is turned off and then
back on again.
Options
Device Info
Display device information menu options.
Software Version: Displays current software
version. Press OK to open the update centre. In
addition to the current software version, the last
update date information can be found here. The
CHECK UPDATE option will be highlighted. Press
OK to start a manual search for a software update.
To do this, your Display should be connected
to the Internet. If any update is found, you can
download and install the new software using the
related options. Follow the on-screen instructions
to complete the process.
Serial Number: Displays serial number of the
Display. (Cannot be changed by the user)
Model Name: Displays model name of the Display.
(Cannot be changed by the user)
Save Model Information: Copies the model
information data of the Display to a connected
USB device.
Display Life Time: Displays the lifetime of the
Display in hours.
Controls
Pixel shift: Enables or disables pixel shifting. This
option can be used to avoid image retention (after
image effects) that can occur when displaying fixed
patterns or still images for long periods of time. If
English - 19 -
Publicité
