Kimex 160-4075T Manuel D'utilisation page 86

in the background will be displayed. Swipe up or down
to see all apps. You can switch between apps using
this screen. Tap on an app to switch to it. To close an
app, tap on the 'X' sign on the upper right corner of
the app. You can close all recently used apps at once
by tapping on the bin symbol.
Tap anywhere on the screen or the Back button on the
General Tools Bar to exit.
Display Settings Menu Content
You can configure the settings of your Display using
the Display Settings menu. In order to access this
menu, press the Menu button on the remote, tap on the
Display Settings widget (
on the Settings Board. Available options will be listed.
As mentioned earlier in the General Use section, the
Settings menu is not fully compatible with the touch
screen. So it will be more convenient to use the remote
control when navigating through the menu.
Note that some options in the Display Settings menu
may not be available depending on the model of your
Display and its features.
Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be set to
one of these options: Game, Sports, Signage, Natural,
and Text.
Some of the picture settings will be adjusted according
to the selected picture mode.
Energy Saving: Set your preference for energy
saving. If set to Eco the Display will adjust the energy
consumption accordingly. Set to Off to turn this setting
off. Some other picture settings may not be changed
if this option is set to Eco.
When the Display is not in use, you can switch off or
disconnect the Display from the mains plug to reduce
or cut the energy consumption.
Contrast: Adjust the contrast value of the screen.
Brightness: Adjust the brightness value of the screen.
Sharpness: Adjust the sharpness value for the objects
displayed on the screen.
Colour: Adjust the colour saturation value of the
screen.
Backlight: Adjust the backlight level of the screen
manually. This item will not be available if the Energy
Saving option is set to Eco.
Picture Zoom: Set the aspect ratio of the screen.
To make the image fit the screen exactly, you can
select one of the predefined options according to
your preference.
Advanced Settings
) on the Home Screen, or
English - 18 -
Dynamic Contrast: Set your preference for the
dynamic contrast ratio setting. High, Medium, Low,
and Off options will be available.
Microdimming: Set your micro dimming preference.
High, Medium, Low, and Off options will be
available. While this feature is active, it will enhance
contrast locally for each defined zone.
Colour Temperature: Set your colour temperature
preference. Normal (9300K), Warm, Cold, and
User options will be available.
Gamma Slider: Adjust the light and dark balance
manually.
Noise Reduction: Set your preference for noise
reducing functionality. High, Medium, Low, and
Off options will be available.
Colour Shift: Adjust the colour tone manually.
Film Mode: It is the function for 3:2 or 2:2 cadence
detection for 24 fps film content and improves the
side effects (like interlacing effect or judder) which
are caused by these pull down methods. Set your
Film Mode preference as Auto or turn it off by
setting to Off.
HDMI RGB Range: This setting should be adjusted
according to input RGB signal range on HDMI
source. It can be limited range (16-235) or full range
(0-255). Set your HDMI RGB range preference.
Auto, Full, and Limit options will be available.
Reset: Reset the video settings to factory default
settings.
Note: Adjusting some of the settings may not affect the picture
on the launcher menu.
Sound
Speakers: To hear the Display audio from the
connected compatible audio device set to External
audio system. Set to Display Speakers to use the
speakers of your Display for sound output.
Dolby Audio Processing: With Dolby Audio Process-
ing, you can improve the sound quality of your Display.
Press OK to see the options and set.
Sound Mode: Highlight the Sound Mode option
and press OK to see the preset sound modes.
Smart, Music, Movie, and News options will be
available. Highlight the option you prefer and press
OK to set.
Balance: Adjust the left and right volume balance for
speakers and headphones.
Digital Output: Set the digital sound output prefer-
ence. PCM, Bypass, and Auto options will be availa-
ble. Highlight the option you prefer and press OK to set.
Note: This option should be set to PCM instead of Auto, if
the connected external audio device does not support DD.
Otherwise, no sound will be heard from the connected device.