Kimex 160-4075T Manuel D'utilisation page 103

GETMENUTIMEOUT
AUTOTVOFF
GETAUTOTVOFF
GETSTANDBY
ENTERACTIVE
STANDBY
EXITACTIVESTANDBY
GETTVLIFETIME
SETPOWERONDELAY
GETPOWERONDELAY
SIGNAGERESET
SWOL
Get menu time out mode
Set auto panel off level.
Get auto panel off mode.
Get standby on/off.
Enter active standby
state
Exit active standby state
Prints panel life time in
minutes.
Set poweron delay level
Get poweron delay level
Set all items in the
signage settings menu to
their default values.
Set Wake on Lan option
English - 35 -
no parameter
integer n (0 = off,
1 = 1 HOUR,
2 = 2 HOUR,
3 = 3 HOUR,
4 = 4 HOUR,
5 = 5 HOUR,
6 = 6 HOUR,
7 = 7 HOUR,
8 = 8 HOUR )
no parameter
no parameter
no parameter
no parameter
no parameter
integer n (0<=n<=20, delay
is calculated as 100ms*n)
no parameter
no parameter
integer n ( n = 1 (enable),
n = 0 (disable))
#*menu timeout mode
is OFF
or
#*menu timeout mode is n
or
#*can not get menu
timeout mode
Note: Above n is one of
(15, 30,45, 60)
#*set auto display off
mode to n
or
#*set auto display off
mode to OFF
or
#*auto display off must be
Integer and between [0-8]
#*auto Display off is n
or
#*auto Display off is OFF
#*standby off
or
#*standby on
#*Display will be sent to
Active Standby state!
or
#*Display is in Active
Standby state already!
#Display will be turned on!
or
#* Display is not in Active
Standby state!
#*Display Life Time: n
#*Power on delay set to
... ms
or
#*NACK
#*The power on delay is
... ms
#*All signage settings set
to default values
#*Wake on Lan is set to
enable.
or
#*Wake on Lan is set to
disable.
or
#*NACK