Publicité
Les langues disponibles
Les langues disponibles
SETCONTRAST
GETBRIGHTNESS
SETBRIGHTNESS
GETSHARPNESS
SETSHARPNESS
PICTUREZOOM
GETPICTUREZOOM
SETNOISEREDUCTION Set noise reduction.
GETNOISEREDUCTION Get noise reduction.
BRIGHTNESSUP
Set picture contrast
value.
Get picture brightness
value.
Set picture brightness
value.
Get picture sharpness
value.
Set picture sharpness
value.
Set picture zoom mode.
Get picture zoom mode.
Inrease Brightness Level
by 1 step
English - 43 -
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
str-int n (n = auto, 16:9,
subtitle, 14:9, 14:9zoom,
4:3, full(only for HD
channels), cinema)
Customer Christie => ( n
= auto shows Overscan
on Display )
no parameter
str-int n (n = OFF, n =
LOW, n = MEDIUM, n =
HIGH)
no parameter
no parameter
#*Picture contrast value is
set to n
or
#*Same value is set. Do
nothing.
or
#*Incorrect parameter
entered! Value must be in
the range 0-100
#*THE BRIGHTNESS
VALUE : ...
#*Picture brightness value
is set to n
or
#*Same value is set. Do
nothing.
or
#*Incorrect parameter
entered! Value must be in
the range 0-100
#*THE SHARPNESS
VALUE : ...
#*Picture brightness value
is set to n
or
#*Same value is set. Do
nothing.
or
#*Incorrect parameter
entered! Value must be in
the range 0-100
#*setPictureZoomMode()
set to n
or
#*Incorrect picture zoom
mode parameter entered
#*Picture zoommode is ...
#*NoiseReduction set to n
or
#*Missing noise reduction
state
#*NoiseReduction is ...
Picture brightness value is
set to ...
or
Picture brightness value is
at max value.
You can not increase
brightness level further.
Publicité
