Publicité
POSITION OF THE CONCRETE MIXER
The machine should be set on a solid and as flat as possibile
surface.
This concrete-mixer has been produced in
according with safety standards an safety at works laws
currently in force.
To avoid possible accidents, particularly if the concrete mixer
is empty, due to a heavy wind, the machine must be switched
off and tacken to a place sheltered from the wind or
use proper anchorage device, as shown on the picture..
M10 threaded rod
Nut M 10
Plinth
Pag. 9
Amis rev. 05 – 2014 – IT_GB_FR
Foot machinery
Ground
Publicité
