krispol STARCUS F50 Manuel D'installation page 82

DESCRIPTION OF THE CONTROL PANEL INPUTS / OUTPUTS
XHO5
Electric lock power supply output
XH06
Relay outputs
XH09
Inputs for safety systems
Service door security / Amperometric safety bar / Pneumatic slat
WT GND
BR +12V
GN Signal
SP15/SD Safety input for connecting a wicket door sensor in the door
Note 1: SP15 is disconnected, the door drive stops, and all control functions are inactive.
Note 2: The amperometric safety ledge after detecting an obstacle while closing the door, and the door
drive automatically reverses.
82
24V DC electric lock power output,
max load 2A, working time 3 seconds,
+/-
6.3
the function must be on
relay output, max load
100W, select the function
NC/COM/NO
parameters in the MENU
6.7
relay output, max load
100W, select the function
NC1/COM1/N01
parameters in the MENU
6.6