krispol STARCUS F50 Manuel D'installation page 71

SETTINGS OF FUNCTION PARAMETERS IN MENU
6. 5
Setting the ope-
ration of the acoustic
signalling device
6.5 Press and hold the SET button for about 6 se-
conds until the display shows 0.; then release the
button
- use the + button to select 6.; then shortly press
the SET button to select this function
- press the SET button again and the display will
show 6.0 (default)
- use the + button to select 6.5 then short press
the SET button to select this function and display
the parameters:
. 1 The acoustic signalling device is activated
when the door is being opened.
. 2 The acoustic signalling device is activated
when the door is being closed.
The acoustic signalling device is activated
. 3
when the door is being opened or closed.
The acoustic signalling device is turned off
. 4
. 4
Note
By default.
71