Lenze EMB934 Serie Manuel D'instructions page 89

Fig.12-2
All dimensions in millimetres.
Installation steps
How to mount the mains filter:
1. Drill holes into the mounting plate of the control cabinet for screwing the mains
filter:
– The mains filter must be mounted near the regenerative power supply module
(from a connecting cable length of 30 cm, shielded cables must be used).
– The condition of the wall and the mounting material must provide for the
mechanical connection to be long-lasting.
– Observe dimensions and distances of the drill holes .
– Allow a free space of 100 mm at the top and at the bottom.
– Vertical mounting position with mains connection on the top.
2. Screw the mains filter and the mounting plate of the control cabinet together.
– Provide for long-lasting mechanical connections.
EDBMB9340 DE/EN/FR 9.0
Regenerative power supply modules EMB9341 and EMB9342
105
7
PE L1 L2 L3
LIN E
LO AD
PE L1 ' L2 ' L3 '
92
135
Dimensions of mains filter EZN3A0088H024 for EMB9342
Mechanical installation
Mains filter mounting
200
230
4
9340vrm018
89