Lenze EMB934 Serie Manuel D'instructions page 70

Scope of supply
Pos. Description
Regenerative power supply module EMB934x
Accessory kit with mounting and installation material
Operating Instructions
Elements at the front
Pos. Description
Cover of power connections
Control connections
Displays
The two LEDs at the front of the regenerative power supply module indicate the operating status:
Pos. Status
green red
on off
off on
off off
© 2005 Lenze Drive Systems GmbH, Hans-Lenze-Straße 1, D-31855 Aerzen
No part of this documentation may be reproduced or made accessible to third parties without written consent by Lenze Drive
Systems GmbH.
All information given in this documentation has been selected carefully and complies with the hardware and software described.
Nevertheless, deviations cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur.
Necessary corrections will be included in subsequent editions.
70
Description p
The regenerative power supply module is connected to the mains voltage and is ready for
operation.
No faults.
Active fault
Mains voltage is switched off
Mains phase L2 or L3 failed
EDBMB9340 DE/EN/FR 9.0