Battery Recycling - Panasonic EY6803 Instructions D'utilisation

Shoulder pad
• The shoulder strap can be adjusted
according to the individual.
• Adjust the shoulder pad to the
shoulder.
• Pull the shoulder strap to make
sure it is firmly attached to the main
unit of the tool.
For Appropriate Use of Battery
Pack
Ni-MH Battery Pack (EY9201)
• Charge the Ni-MH battery fully
before storage in order to ensure a
longer service life.
• The ambient temperature range is
between 0°C (3°F) and 40°C (104°F).
If the battery pack is used when the
battery temperature is below 0°C
(3°F), the tool may fail to function
properly. In that case, charge the
battery until charging is completed for
appropriate functioning of the battery.
• When battery pack is not in use,
keep it away from other metal
objects like: paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals together
may cause sparks, burns or a fire.
• When operating the battery pack,
make sure the work place is well
ventilated.
Battery Pack Life
The rechargeable batteries have a
limited life. If operation time becomes
extremely short after recharging, replace
the battery pack with a new one.
NOTE: Use under extremely hot or
cold conditions will reduce
operating capacity per charge.
EY6803(UL).indb 8

Battery Recycling

ATTENTION:
FOR Ni-MH Battery Packs, EY9201
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Charging
NOTE: When you charge the battery
pack for the first time, or after
prolonged storage, charge it
for about 4 hours to bring the
battery up to full capacity.
Battery charger (EY0110)
1. Plug the charger into the AC outlet.
NOTE: Sparks may be produced when
the plug is inserted into the AC
power supply, but this is not a
problem in terms of safety.
. Insert the battery pack firmly into the
charger.
Battery pack
3. During charging, the charging lamp
will be lit.
When charging is completed, an internal
electronic switch will automatically be
triggered to prevent overcharging.
• Charging will not start if the battery
pack is warm (for example, immediately
after heavy-duty operation).
The orange standby lamp will be lit
until the battery cools down. Charging
will then begin automatically.
4. When charging is completed, the
charging lamp will start flashing
quickly in green color.
- 8 -
To AC
outlet
Battery charger
2006/04/11 16:51:48