Siemens SIMOVERT MASTERDRIVES Motion Control Instructions De Service page 185

08.2009
Opening the unit
Siemens AG 6SE7087-7JP50
SIMOVERT MASTERDRIVES
♦ For simpler disassembly, start with levering out the left one of the
two housing chambers of the DC link terminals from the unit using a
slot-head screwdriver.
♦ Unscrew the four fixing screws from the bottom and topside of the
device. Carefully lever out the front cover from the five detent lugs
on the right-hand side of the device using a slot-head screwdriver
(see Detail A, Fig. 5-8). The front cover needs to be loosened only
on one side, the right-hand side panel. Front cover and left-hand
side panel remain as one unit.
Fig. 5-8
Operating Instructions
Installation
5-9