Accessories; Washer; Washing System Connection - Videotec ULISSE RADICAL Manuel D'instructions

10 Accessories

For further details on configuration and
use, refer to the relative manual.

10.1 Washer

The product can be equipped with an external pump
that provides water to clean the glass.
When a control is provided, the Pan & Tilt is
positioned with the window in front of the nozzle. (
9.1.2 User Controls page, page 22). The pump and
wiper are activated for a set period of time. At the end
of the operation the P&T returns to its initial position.
Fig. 70
MNVCUPKHXL_2222_EN

10.1.1 Washing system connection

CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
CAUTION! In order to reduce the risk of fire,
only use UL Listed or CSA certified cables
with sections greater than or equal to
0.14mm² (26AWG).
All signal cables must be grouped together
by means of a cable tie.
WASHING SYSTEM CONNECTION
Terminals
O1-C1
Tab. 5
Fig. 71
Description
Clean contact to activate the
washing system.
O1 C1
31