Publicité
Les langues disponibles
Les langues disponibles
3 Assembly
❼ Move the quick-release lever into the open position. With
one hand on the quick-release lever and one hand on the
adjustment nut, start to hand tighten the adjustment nut
until you start to feel some resistance against the fork.
Figure 3.13
❽ Try to close the quick-release lever. If it closes easily, open
it up and tighten the adjustment nut further. If it is too
difficult to close, open the quick-release lever up and
loosen the adjustment nut a little and try again. Do not
attempt to tighten by turning the quick-release lever. The
quick-release lever is for closing, the adjustment nut is for
adjusting the tension.
Important! Only tighten
the quick-release with the
adjustment nut.
24
Important! You should feel resistance when you close
the quick-release lever that should leave a temporary
impression on your fingers. Open and close the handle to
ensure the wheel is securely locked in place.
❾ Re-check that the handlebars are perpendicular to the front
wheel. Adjust if needed.
Quick-release
lever in closed
position
7
Quick-release
lever in the
open position
Figure 3.13
Publicité
