Normal Maintenance - Graef CX125 Mode D'emploi

NO lubrication is required for any moving parts, motor, bearings or sharpening
surfaces. There is no need for water on abrasives. The exterior of the sharpener
may be cleaned by carefully wiping with a soft damp cloth. Do not use deter-
gents or abrasives.
Once a year or so as needed you should remove metal dust that will ac-
cumulate inside the sharpener from repeated sharpenings. Remove the small
rectangular clean-out cover that covers an opening on the underside of the
sharpener. You will find metal particles adhered to a magnet attached to the
inside of that cover. Simply rub off or brush off accumulated filings from the
magnet with a paper towel or tooth brush and reinsert the cover in the opening.
If larger amounts of metal or other dust have been created you can shake out
any remaining dust through the bottom opening when the cover is removed.
After cleaning, replace the cover securely with its magnet in place.

NORMAL MAINTENANCE

DE
EN
FR
NL
ES
IT
PL
27