ATH-Heinl ATH-W Mode D'emploi page 86

Remove the fixing screws from the housing.
Next, pick up the weight storage unit and position
it on the machine housing.
Now connect the cable to the circuit board and
secure this at the correct entry using cable ties.
Use the fixing screws to fix the weight storage
unit to the housing.
2.9.4. Assembling the wheel protector
Unpack the wheel protector and place it next to the
machine
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-07
Manufacturer ATH-Heinl GmbH & CO.KG
- 25 -