ATH-Heinl ATH-W Mode D'emploi page 78

2.0 INSTALLATION
The machine must be installed by an authorised person according to the instructions.
The operating instructions (including the log) are an important part
The product must be checked after completion of the installation, handover, if necessary briefing and then
regularly in accordance with the applicable regulations and legal provisions in the country of operation by a
suitable and approved company or facility.
2.1 Transport & Storage Conditions
When transporting and positioning the machine, always use suitable lifting and material handling
equipment and consider the machine's centre of gravity.
The machine should only be transported with the original packaging.
Data:
Width
Length
Height
Storage temperature
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-07
of the machine / product.
!!!PLEASE STORE CAREFULLY!!!
----
1.800 mm
900 mm
1.180 mm
-10 to +50 °C
Manufacturer ATH-Heinl GmbH & CO.KG
- 17 -