ATH-Heinl ATH-W Mode D'emploi page 72

1.3.5 Starting the balancing process
Start the balancing process using the
STARTbutton or by closing the wheel protector
Turn the wheel until all the diodes on the display
light up
The weight must then be applied to the wheel.
The machine provides you with the following aids
to ensure precise positioning:
Internal
Programme
weight
12 o'clock
DYN position
(laser)
STA 12 o'clock position (laser)
12 o'clock
ALU1 position
(laser)
12 o'clock
ALU2 position
(laser)
Weight
support on
the gauge
ALUS arm or 6
o´clock
position
(laser)
Adjustment of weight attachment by using
gauge or 6 o´clock laser is described in chapter
2.9.8.
a) HID function
The HID function allows you to position the external balancing weight in a hidden spot behind the
spokes.
This function is available in ALU2 and ALUS mode.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-07
External
weight
12 o'clock
position
12 o'clock
position
Weight
support on
the gauge
arm or 6
o´clock
position
(laser)
Weight
support on
the gauge
arm or 6
o´clock
position
(laser)
Manufacturer ATH-Heinl GmbH & CO.KG
- 11 -
/