EUROM Polar 12C Mode D'emploi page 22

Installation
The device is packed in one box. Remove all packaging material and check that the device is
not damaged. Do not use the device if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport.
WARNING
Do not put the power plug into the wall socket before the device is correctly
mounted.
Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 1800 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
1. The device can be moved from room to
room. Make sure to not tilt the device more
than 45 degrees. (Figure 6).
2. Place the device on a firm and horizontal
surface near a power socket and an outlet
possibility.
3. Place the device with a minimum clearance
distance of 50 cm on all sides (Figure 7).
22
Figure 6
Figure 7