Technoline WS1700 Mode D'emploi page 34

Hint
You can adjust the time manually in case the clock cannot receive the DCF radio signal (due to
interference, large distance to the sender, obstructions like mountains, etc.) As soon as the
radio signal can be received, the clock will be adjusted automatically.
Manual setting

Press "MODE" to switch to the "Time display mode"

Press and hold the "MODE" button for 3 seconds.

The 12/24 hour flashing. Use "UP " and "DOWN " to select.

Press "MODE " to confirm.

The display for the time zone is flashing. Use "UP " and "DOWN " to select the time zone
(-12 to +12).

Press "MODE " to confirm.

The DM/MD flashing, Use "UP " and "DOWN " to select.

Press "MODE " to confirm.

The display for the year is flashing. Use "UP " and "DOWN " to select the year.

Press "MODE " to confirm.

The display for the month is flashing. Use"UP " and "DOWN " to select the month.

Press "MODE " to confirm.

The display for the date is flashing. Use "UP " and "DOWN " to select the date.

Press "MODE " to confirm.

The display for the hour is flashing. Use "UP" and "DOWN " to select the hour.

Press "MODE " to confirm.

The display for the minutes is flashing. Use "UP " and "DOWN " to select the minutes.

Press "MODE " to confirm.

The language selection for the display of the weekdays is flashing. Use "UP " and
"DOWN " to select the language (GER- German, ENG - English, ITA - Italian, FRE -
French, DUT - Dutch, SPA - Spanish, DAN - Danish).

Press "MODE " to confirm

The °C/°F for temperature flashing, Use "UP "and "DOWN "to select the temperature
unit.

Press "MODE " to confirm.

The hPa/inHg for air pressure flashing, Use "UP " and "DOWN" to select .

Press "MODE " to confirm.

The mm/inch for rainfall and kmh/mph flashing, Use "UP "and "DOWN "to select.

Press "MODE " to confirm and exit setting mode.
Information:

The station automatically exits the set-up mode if no keys are pressed for 20 seconds.

Explanation for the time zone display: