Technoline WS1700 Mode D'emploi page 31


Note: The cover of the Rain Gauge can be removed by rotating in an anti-clockwise
direction. When replacing the cover it will only fit in one position. When you find the
correct position it fits snugly on, and then rotate it clockwise to secure the cover in
place.

It is important that the cover is securely located.
5) Mounting the thermo-hygro sensor to the
Once the wind sensors and rain sensor are fixed onto the bracket, insert the cables from the
Wind Sensor & the Rain Gauge into the correct sockets. These are label on the plastic under
the sockets.
bracket: