Technoline WS1700 Mode D'emploi page 30

3) Mounting the wind direction sensor to the bracket: first check the wind direction
sensor before fixing, the wind direction sensor should now be mounted onto the bracket
provided to allow the wind to travel around the sensor unhindered from all directions. Then fix it
with bolt and screw. There is one cable from wind speed sensor, please insert it into the socket
under the wind direction sensor. Please follow the below display:
Attention!! Please align the "North" indicator sticker with the NORTH direction to enable it to
record accurate reading
4) Mounting the rain sensor to the bracket: there are vertical engraved lines at the
bottom edge of the round cover and the sensor part, you only need adjust the two line into one
position, then turn clockwise, the rain sensor part will be connected well, then fix them with 4
screws and bolt onto the plastic bracket. Please follow the below display：