Dea NET EXP Notice D'emploi Et Avertissements page 26

PAR. PARAMETER DESCRIPTION
Remote control enabling:
To enable the remote control, P077=1 and P078=0 must be set.
Warning: The remote control is enabled by default.
Enabling the NET_EXP expansion board:
To enable the NET_EXP board, P078=1 and P077=0 must be set.
Warning: The expansion board is disabled by default.
Warning: If a default of settings is carried out, the parameters must be correctly set.
INPUT_1 input type selection
INPUT_2 input type selection
INPUT_3 input type selection
INPUT_4 input type selection
INPUT_5 input type selection
INPUT_6 input type selection
INPUT_1 operation selection
INPUT_2 operation selection
INPUT_3 operation selection
INPUT_4 operation selection
INPUT_5 operation selection
INPUT_6 operation selection
24