Identification; Product Description And Type Designation; Product Marking Label; Preparing The Product For Use - Videotec NXW Manuel D'instructions

4 Identification

4.1 Product description and type
designation
The solid construction of this housing makes it
suitable for heavy-duty applications, such as the
surveillance of ovens, foundries and other high-
temperature environments.
The NXW housing, entirely made of polished
stainless steel, consists of a body with double
chamber for the circulation of coolant or cooling
air, closed by two very thick flanges. The rear
flange enables cable passage using two cable
glands PG13.5. The front flange can be equipped
with tempered glass or quartz glass for high
temperatures.

4.2 Product marking label

See the label attached to the product.
Check the label on the product packaging.
4
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.

5.1 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Housing
• Housing equipment:
• Allen wrench
• Spacers
• Bolts and screws
• Instruction manual
5.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
MNVCNXW_2222_EN