Mode Of Operation; Preparing For Operation Of The Device - B.Braun AESCULAP ECCOS Mode D'emploi

4. Mode of operation

The storage trays have been designed so as to cover critical openings
and to provide immediate drainage of fluids that might enter the
components to be cleaned. The components must therefore be pushed
onto their holders as far as they will go.
Ø To ensure that the components are not damaged
during mechanical cleaning, the components must
be inserted correctly.

5. Preparing for operation of the device

Please note that any tilting of the machines leads to more space being
required. Therefore, the storage trays should be fastened in a basket
only in accordance with the following table:
Suitable baskets
Height 25 mm 50 mm
JF 211 R JF 212 R
Art. no. JF 221 R JF 222 R
JF 251 R JF 252 R
GB 460 R
GB 461 R
GB 462 R
GB 463 R
GB 464 R
GB 465 R
GB 466 R
GB 467 R
GB 468 R
GB 469 R
GB 470 R
GB 471 R
GB 472 R
GB 474 R
GB 475 R
GB 476 R
GB 477 R
GB 478 R
GB 479 R
GB 504 R
GB 506 R
GB 509 R
GB 558 R
14
Storage system for mechanical motor preparation
70 mm 100 mm
JF 213 R JF 214 R
JF 223 R JF 224 R
JF 253 R JF 254 R
(GA 464)
Suitable baskets
Height 25 mm 50 mm
JF 211 R JF 212 R
Art. no. JF 221 R JF 222 R
JF 251 R JF 252 R
GB 559 R
GB 560 R
GB 561 R
GB 562 R
GB 563 R
GB 564 R
GB 565 R
GB 567 R
GB 568 R
GB 572 R
GB 573 R
GB 671 R
GB 672 R
GB 673 R
GB 674 R
GB 675 R
GB 680 R
GB 681 R
GB 682 R
GB 683 R
GB 684 R
GB 685 R
GB 686 R
GB 687 R
When installing several storage trays in one basket, the basket has to
be selected according to the bed requiring the most space (height).
Example:
For installing the storage trays GB 461 R and GB 464 R in a single
basket, a basket of a height of 100 mm (e. g. JF 214 R) must be used.
70 mm 100 mm
JF 213 R JF 214 R
JF 223 R JF 224 R
JF 253 R JF 254 R