Mounting The Anti-Ice And Anti-Condensation Caps - SORHEA SOLARIS Notice D'installation

SORHEA
6

MOUNTING THE ANTI-ICE AND ANTI-CONDENSATION CAPS

Note: mounting the anti-ice and anti-condensation caps in their support will only be done during the
st
1 installation.
Clip the caps
just above each
cell.
Screw in
the caps.
Position of the caps for a cell inclination of +/-10°:
Column with caps above the cells
1
2
Column with all the caps
3
Divide the
remaining caps
along the column
in order to hide
the position of the
real beams.
- 46 -
SOLARIS
Correct mounting
Wrong mounting:
caps are placed too
low
Wrong mounting:
caps are placed too
high
Do not place a cap
just below a cell.
Leave around 10cm.