Alignment And Adjustment; Connecting The Battery Pack; Channel Selection - SORHEA SOLARIS Notice D'installation

SORHEA
5

ALIGNMENT AND ADJUSTMENT

5.1

Connecting the battery pack

5.2

Channel selection

To prevent interference by one barrier with another at the same site, barriers are equipped with four
selectable frequencies (channels).
The 2 columns that comprise a barrier must be configured with the same channel number. This
configuration is performed by using the switches on the control board.
Alternate the channels on the barriers that are closest to each other.
The channel is activated when the configuration is validated. (cf. §5.3)
Lower down the
column on the
floor socket and
fasten the screws.
Channel 1
Channel 3 Channel 4
Channel 2
- 40 -
5
Connect the battery
pack by wiring the red
wire on the terminal +
of the battery pack
SOLARIS