Mounting The Cover With The Caps; Remounting The Metallic Cap; Basic Maintenance - SORHEA SOLARIS Notice D'installation

Barriere autonome a infrarouge actif
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SORHEA
9.5

Mounting the cover with the caps

9.6

Remounting the metallic cap

(Only for columns 2.5 m / 8.2 ft and 3 m / 10 ft)
10

BASIC MAINTENANCE

To ensure correct performance over time, basic maintenance should be carried-out:
 Clean the cover of each column at least once a year. (Or more often in dirty environments
where the columns are exposed to sand, dust, mud etc.)
 Clean the solar panel. (Once a year)
Replace the cover with
the 4 mounting screws
1
Pivot
downwards the
metallic cap to
put it on the
floor socket
pillars.
- 51 -
SOLARIS
2
Lower down the
metallic cap to the
mark on the floor
socket.
Screw in.
Mark left on the floor
socket when the anti-
ice and anti-
condensation caps
have been positioned.

Publicité

Table des Matières
loading

Table des Matières