Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Einbauanl_CD5_0.book Seite 43 Montag, 1. Juli 2002 2:38 14
Enter the correct tyre size using the SELECT control and confirm the
entry by pressing for more than 2 seconds.
The letter "R" cannot be entered. 3 numbers must be en-
tered before and after the slashes. Insert a "0" for any miss-
ing numbers.
Example:
Specification in vehicle registration papers: 185/55R15
81T
Input into unit: 185/055/015
Then select between
NEW TYRE TREAD
turning the SELECT control to enter the approximate tread depth value.
Press the SELECT control to confirm the selection.
The previously entered data is displayed once more. If the data entered
is correct, press the SELECT control.
If correction is necessary, select
trol and press to confirm. The values can then be re-entered.
After confirming the tyre data or the previously confirmed point
, the adjacent display appears.
SELF CALIBRATION
After a short time, the unit switches to the main navigation menu or the
calibration ride is requested.
The unit is now in calibration status 2. Absolute precision
is, however, only achieved as of calibration status 3.
Subject to correction and technical modifications
and
USED TYRE TREAD
by
by turning the SELECT con-
MODIFY
START
43
Installation guide
INPUT TYRES:
TYRE SIZE
'''/'''/'''
01234567890
N E W T Y R E T R E A D ( > 5 M M )
USED TYRE TREAD (<= 5MM)
1 8 5 / 0 5 5 / 0 1 5 , N E W
MODIFY
INPUT DONE
Copyright by Becker GmbH, D-76303 Karlsbad
Publicité
Table des Matières
