Sony MEX-100NV Instructions De Montage page 39

Einbauanl_CD5_0.book Seite 37 Montag, 1. Juli 2002 2:38 14
10. Calibration
After commissioning, a calibration journey is required. During the jour-
ney, the speed signal (GAL) is automatically adapted to the
vehicle-specific data and the gyro sensor is automatically adapted
to the installation position of the unit.
The distance to be covered depends on the type of vehicle and the local
conditions.
The navigation system is only ready for operation on com-
pletion of the calibration journey. The main navigation
menu is displayed. Final precision is only achieved after a
further journey.
• The adjacent display appears after the language installation.
It is possible that GPS reception has deteriorated as a result of
changing the vehicle position and due to obstructions. In this case,
the adjacent display appears.
Adequate GPS reception must be ensured for the calibra-
tion ride. This means at least 2-D FIX. With GPS FIX 3-D
the calibration will be quicker. However: a lower accuracy
of the GPS signal (2-D FIX) does not lead to a poorer cali-
bration, but instead will mean that the time and distance
needed for the calibration will increase.
Subject to correction and technical modifications
CALIBRATION RIDE CAN START
WHEEL: 3451,GYRO: 30, SAT: 4
48:52.53N
PLEASE WAIT FOR GPS RECEPTION!
CALIBRATION RIDE NOT POSSIBLE
16.09.99
37
Copyright by Becker GmbH, D-76303 Karlsbad
Installation guide
08:30.25E
09:15 1-D FIX