Installation; General Notes; Safety Distances - Rizzoli S Série Manuel D'utilisation

2

INSTALLATION

2.1

GENERAL NOTES

Wood fired cookers and thermal cookers are easy
to install; anyway you must take some cares to
avoid damages due to unskillfulness. Before the
installation, we recommend to verify the necessary
space, the safety distances, the correct predisposi­
tion of the chimney and the possibility to make the
necessary connections.
2.2

SAFETY DISTANCES

Be sure that the cookers and the thermal cookers
that have to be framed has the minimum safety
distances to inflammable or high temperatures
sensible materials (see paragraph 7.2). Rizzoli pro­
duces also spacers to make the installation into
furniture easier. If the cooker is framed between
not sensible to heating materials, it is necessary
anyway to keep a minimum distance of 1­2 mm
to allow the dilatation of the materials when the
temperature changes.
The device must be placed on a roof with enough
load capacity. If the existing building does not sat­
isfy this condition, you must adopt different solu­
tions (for example you can use a plate to distribute
the load).
Before final positioning it is recommended to
check that the levelling feet are in the high posi­
tion so as not to touch the floor.
Min.
25 cm
Picture 3 - Minimum safety distances in combination with special spacers for recessed insertion.
Particular attention must be paid to the connec­
tion with a suitable heating system and to the con­
nection to the chimney, which must be properly
adjusted and sized according to the appliance.
Do not drag the device, move it keeping it lifted
from the floor. The device must not be moved
making effort on the handrail or on the handles.
In case of floor made with inflammable material,
it is necessary to use a fireproof protection for
the floor in front of the fire door. The cover of the
floor must extend for 50 cm minimum in the front
part and 30 cm minimum over the fire door on the
sides. We suggest not to install furniture upon the
device. Eventually, the resistance of the furniture
to heat must be guaranteed, in this case you must
respect a minimum distance of 60 cm from the
plate. In case you want to use an aspiring hood, it
is absolutely necessary that it is resistant to high
temperatures. Rizzoli is specialized in the produc­
tion of aspiring hoods to be used together with the
wood fired cookers or thermal cookers. During the
installation, you must be sure not to obstruct the
ventilation holes on the top: this to prevent the
decadence of the isolating properties of the device
and, in general, of its correct working.
25 cm
Min.
60 cm
85
Min.
Min.
60 cm