Operating Your Breville Product; Product Overview; Initial Setup - Breville the Grind Control BDC650 Manuel D'instructions

OPERATING YOUR BREVILLE PRODUCT

OPERATING YOUR BREVILLE PRODUCT
FRESH IS BEST
To get the most out of your Grind Control™
coffee brewer we recommend using quality
freshly roasted whole bean coffee & grind right
before you brew. Coffee is at its peak flavor
potential 5-20 days after roasting. Always buy
coffee with a "Roasted On" date printed on
the bag and avoid buying coffee with a "Best
Before" or "Use By" date, as you never know
when it was roasted. Coffee loses flavor and its
aromatics once it's ground, so grinding right
before you brew is the key to great tasting
coffee with superior flavor and aroma.

PRODUCT OVERVIEW

Your Grind Control™ coffee brewer is the first
drip coffee maker with an adjustable built-in
grinder and calibration mode.
The adjustable grinder features machined
stainless steel burrs that allow you to adjust
the coarseness or fineness to optimize flavor
balance.
The calibration mode allows you adjust the
amount of coffee delivered on any strength/
cup size setting to suit coffee of varying grind
size, origins, age and degree of roast, so you
can achieve the maximum flavor potential from
any coffee you choose.
The Grind Control™ also allows you to brew a
single cup or travel mug in "cup" mode or from
2 to 12 cups in "carafe" mode.
10
BDC650BSS_USC_IB_E20_FA.indd 10
BEFORE FIRST USE
Unpack all parts and accessories before
removing and safely discarding all packaging
material and promotional labels. Ensure the
power cord is unplugged from the power outlet.
Wipe the exterior stainless steel housing with
a soft, damp cloth. Wash the bean hopper and
lid, coffee basket, gold tone filter and carafe in
warm, soapy water and a soft cloth. Do not use
abrasive cleansers, pads or cloths which can
scratch the surface. Rinse and dry thoroughly.
INITIAL SET UP
1. Install the Bean Hopper
Position the hopper onto the machine. Turn the
locking knob clockwise in the direction of the
LOCK arrow until it clicks. Fill the hopper with
fresh beans.
We recommend always keeping the hopper full
(0.5lb maximum) to ensure there are sufficient
beans. However, never over-pack the hopper
as this may result in the grinder jamming.
Replace the hopper lid.
NOTE
For easy removal, transfer and storage
of beans, the hopper can be removed
by turning the locking knob counter-
clockwise in the direction of the UNLOCK
arrow. If you have removed the hopper,
ensure it is securely reassembled back
onto the machine. The safety interlock
system will prevent operation if the
hopper is incorrectly assembled. The LCD
screen will flash 'LOCK BEAN HOPPER'
until the issue is resolved.
24/1/20 9:41 am