Breville the Grind Control BDC650 Manuel D'instructions page 17

OPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCT
3. Select 'Single Cup' Mode
Press the CUP|CARAFE dial until the LCD
screen displays the CUP symbol and the
current cup size selected in ounces. Rotate the
CUP|CARAFE dial to select the required size.
There are 7 size options to accommodate
for different amounts or milk, half-and- half
and creamer. Always ensure your cup is an
adequate size for the setting selected.
The amounts displayed on the LCD screen
are approximate only. Actual amounts may
vary depending on the type of filter used, the
coffee grind size, roast, blend and freshness, or
amount and type of pre-ground coffee used.
4. Select the Brew Strength or
'PRE-GROUND' Coffee Setting
There are 8 strength settings. The LCD screen
will display the current strength setting. Rotate
the STRENGTH dial to select your required
strength. 1 is the weakest and 8 is the strongest.
We recommend starting on setting 4 for a
medium strength coffee. Adjust strength
higher or lower to suit your taste.
NOTE
If using pre-ground coffee, select the
'PRE-GROUND' coffee setting. This will
disable the grinder. Add pre-ground
coffee to the gold tone filter or a paper
filter. We recommend 1 level tablespoon
of pre-ground coffee per 5oz/150ml cup
of water. Adjust the amount according
to your individual taste. The maximum
capacity for pre-ground coffee is 12 level
tablespoons. Exceeding this amount may
cause overflow.
16
BDC650BSS_USC_IB_E20_FA.indd 16
5. Start the Brew Cycle
Press the START | CANCEL button.
The grinder will commence grinding the
correct amount of coffee for the selected brew
size and strength. If the 'PRE-GROUND'
coffee setting has been selected, the grinder
will be disabled.
NOTE
Steam may emit from the rear steam vent
during grinding and brewing. This is
normal.
The count-down timer will then begin. The
time displayed is an estimate only and will
depend on the amount and strength settings
you have selected. The LCD screen will display:
a) 'PRE-HEATING' as the water is heated
to the optimal temperature. The
pre-heating time will depend on the
starting temperature of the water in
the water tank.
b) 'INFUSING' as coffee and water are
steeped together.
c) 'BREWING' as the coffee is dispensed
into the cup.
24/1/20 9:41 am