Breville the Grind Control BDC650 Manuel D'instructions page 28

TROUBLESHOOTING TROUBLESHOOTING
PROBLEM
'LOCK BEAN
HOPPER' on LCD
screen
Unable to lock
bean hopper
'FILL TANK' on
LCD screen
'EMPTY COFFEE
FILTER' on LCD
screen
Grinder starts
but operates with
a loud noise. No
coffee in the coffee
basket.
BDC650BSS_USC_IB_E20_FA.indd 27
POSSIBLE CAUSES
Hopper not locked in
place.
Coffee beans
obstructing bean hopper
locking device.
Water tank is empty or
not enough water to brew
your selected volume.
Coffee basket not in
place or not correctly
assembled.
Swing-out door not
closed properly.
Coffee basket not emptied
of used grinds.
Grinder is blocked with
a foreign item.
Moisture clogging
grinder.
WHAT TO DO
Turn the locking knob clockwise
in the direction of the LOCK arrow
until it clicks.
Remove bean hopper. Clear coffee
beans from the grinding chamber
and around the upper burr. Try
re-locking the bean hopper.
Press open the flip-top water tank
lid. Pour the desired amount of cold,
preferably filter water.
Check that the coffee basket lid
is closed and the coffee basket is
firmly seated on the two door hooks.
Close the door until it clicks shut.
Remove the coffee basket and
discard used grinds. Wash the
coffee basket, taking particular
care to rinse the chute area. Dry
thoroughly (especially the chute
area). Attach to the swing-out door.
Close the door until it clicks shut.
Check the bean hopper for any
foreign body. If there is none, refer
to 'Cleaning the Grinding Burrs and
Coffee Grinds Chute', page 23.
Clean and thoroughly dry the
grinding burrs and coffee grinds
chute. Refer to Cleaning the
Grinding Burrs and Coffee Grinds
Chute', page 23. It is possible to
use a hair dryer to blow air into the
grinding chamber and dry the
lower burr. Only re-commence use
when the grinding chamber and
grinding burrs are completely dry.
27
24/1/20 9:41 am