Breville the Grind Control BDC650 Manuel D'instructions page 25

CARE & CLEANING CARE & CLEANING
5. Remove the upper burr by turning the
handle clockwise.
6. Using the provided cleaning brush,
thoroughly remove any build-up of
coffee grinds that have formed around
the grinding burrs and coffee grinds
chute. Ensure the grinds catcher is in
place to catch the loose grinds.
CLEAN THE
GRINDING
BURRS
7. Wipe the coffee grinds chute disc
(the entire stainless steel part) to
remove any build-up of coffee grinds
that have accumulated on the surface.
Dry thoroughly.
8. Replace the upper burr by aligning
the arrow on the upper burr with
the 'ALIGN' mark in the grinding
chamber. The upper burr should
sit flush. Turn the handle counter-
clockwise until it clicks into position.
24
BDC650BSS_USC_IB_E20_FA.indd 24
CLEAN THE
COFFEE
GRINDS CHUTE
9. Replace the bean hopper and lock into
position.
10. Replace the coffee basket onto the
swing-out door and close. The coffee
grinds chute will rotate back to the
closed position. You may hear a
winding noise, this is normal.
11. The LCD screen will no longer display
'CLEAN COFFEE CHUTE'.
The machine is now ready to use.
CLEANING THE GRINDS CATCHER
AND DRIP TRAY
Press the OPEN button to open the swing-out
door. Remove the grinds catcher located under
the coffee grinds chute and the 2-part drip
tray at the base of the machine. Wash in warm,
soapy water. Do not use abrasive cleansers,
pads or cloths which can scratch the surface.
Rinse and dry thoroughly.
CLEANING THE OUTER HOUSING
The outer housing and LCD screen can be
cleaned with a soft, damp cloth. Apply cleanser
to the cloth and not the LCD surface.
Polish with a soft, dry cloth. Cleaning and
drying with dry paper towels or abrasive cloths
and cleaners may scratch the surface.
24/1/20 9:41 am