Breville the Grind Control BDC650 Manuel D'instructions page 13

OPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCT
USING THE GRIND CONTROL™
- CARAFE MODE
First Time Use Only
We recommend flushing the machine to
remove any dust particles or residue from the
manufacturing process. Follow the proceeding
instructions, ensuring to completely fill the
water tank. Step 1 (below) , select '12 CUPS'.
(Step 2, below) and the 'PRE-GROUND' coffee
setting. (Step 4, page 13). However do not
add any coffee to the coffee basket. Once
the cycle is complete, discard the water from
the carafe and repeat the cycle again for best
results. The machine is now ready to use.
1. Fill the Water Tank
Press the flip-top lid to open. Pour the desired
amount of cold, preferably filtered water into
the tank using a jug or the provided carafe.
Never use Distilled, De-mineralized or
highly filtered water as this will affect the
electronics and the taste of your coffee.
If using the carafe, ensure the carafe is clean
and the carafe lid is securely locked in place.
The LCD screen will indicate the amount of
water in the tank as it is filled. The machine will
beep when full and the water level float will rise
to indicate the maximum level. Do not exceed
the 12 cup maximum. Doing so may cause the
carafe to overflow or water spillage at the back
of the machine. Close the flip-top lid.
NOTE
Always ensure your carafe is clean
before brewing. Residual coffee will
affect the taste of your next cup.
12
BDC650BSS_USC_IB_E20_FA.indd 12
NOTE
Check the water level on the LCD
screen before use. We recommend
always keeping the water tank full. The
water tank should be refilled with cold,
preferably filtered water. Never fill with
de-mineralized water or any other liquid.
NOTE
Never pour water into the bean hopper
or grinding chamber area. Doing so can
cause the grinder to clog. Only
re-commence use when the grinding
chamber and grinding burrs are
completely dry. Refer to Troubleshooting,
'Moisture clogging grinder', page 26.
NOTE
Never fill the water tank once the coffee
machine has started a brewing cycle.
This will affect the volume dispensed
into the carafe.
2. Pre-Warm the Carafe
A warm carafe will help maintain the coffee's
optimal temperature and keep coffee hotter
for longer. Remove the carafe lid by turning
counter-clockwise then lifting upwards.
Fill the carafe with hot water and leave to stand
for about 30 seconds then discard the water.
To lock the carafe lid back into position, align
the arrow on the carafe lid with the ALIGN
arrow on the carafe. Turn clockwise until the
arrow on the carafe lid aligns with the LOCK
arrow on the carafe. This ensures that the lid is
closed and in the proper position for brewing
and pouring. Place the carafe into position
under the drip stop outlet.
24/1/20 9:41 am