Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATING YOUR BREVILLE PRODUCT
OPERATING YOUR BREVILLE PRODUCT
PROGRAMMING AUTO START
(OPTIONAL)
The Auto Start feature allows you to program
the specific time when the coffee machine will
automatically turn on and start the grinding
and brewing cycle.
You must set the clock to use the Auto Start
feature. Always remember to reset the clock for
time changes, power outages and when you
unplug the machine.
1.
Press the AUTO START button.
The current Auto Start time will be
displayed and flashing.
2.
Rotate the STRENGTH dial to adjust
the time you want the brewer to start.
3.
Press the STRENGTH button to set the
Auto Start time. The machine will beep
to confirm.
NOTE
If you have not set the clock time, please
follow the instructions below.
4.
The current clock time will flash on the
LCD. Rotate the STRENGTH button
to set the current clock time. Press the
STRENGTH button to confirm.
5.
The machine will now automatically
start the brew cycle at the time
you've set.
18
BDC650BSS_USC_IB_E20_FA.indd 18
6.
Make sure you have:
•
Enough water in the tank.
•
Selected the number of cups you wish
to brew.
•
Set the strength.
•
Fill hopper with fresh beans.
•
A fresh filter paper in the brew basket
& the drawer is closed.
•
A clean, empty carafe under the brew
basket.
7.
If 'AUTO START ON' does not appear,
then the Auto Start feature has not be
activated.
8.
To cancel the Auto On after it's been
set, press the AUTO START button
once.
NOTE
The Auto Start feature must be selected
each time you want to pre-schedule a
brew. Press the AUTO START button
and the programmed Auto Start time
will display on the LCD screen. The Auto
Start feature will not be activated unless
there is adequate amount of water in the
machine for the selected brew volume.
NOTE
Always remember to reset the clock
and Auto Start time when there is a
time change, power outage or after you
unplug the machine.
24/1/20 9:41 am
Publicité
Table des Matières
