Operating Your Breville Duo-Temp™ Espresso Machine - Breville the Duo-Temp BES800XL Livret D'instructions

OPERATING yOUR BREvILLE dUO-TEMP™ ESPRESSO MACHINE
STEP 1 - fILLING THE WATER TANK
• Ensure the Power On/Off button is 'Off'
and the Selector Control is set to the '•'
Standby position.
• Remove the plug from the power outlet.
• Remove the Filter Holder if locked into
the Brew Head and move the Steam
Wand to the side of the machine.
• Remove the Water Tank by pulling with
the handle insert in the front of the
Espresso Machine.
• When the Water Tank is removed, a
black tube slides and extends out from
the Water Tank storage area. Do not
touch or try to remove this tube, it will
automatically slide back into position
when the Water Tank is reinserted.
• Fill the Water Tank with cold water to the
maximum mark on the Water Window
and slide the Water Tank carefully back
into position in the machine.
All manuals and user guides at all-guides.com
NOTE
Check the water level before use and
replace the water daily.
The water tank should be refilled with
fresh cold water before each use.
Do not fill with any other liquid.
STEP 2 - PREPARING THE COffEE
• Place the 1 or 2 cup filter into the Filter
Holder (use the smaller filter for 1 cup
and the larger filter for 2 cups).
• Use 1 level measure of ground espresso
coffee for the 1 cup filter and 2 level
measures for the 2 cup filter. It is
important to use the correct amount
of coffee for each Filter as the filter
perforations have been constructed to
utilise the pressure in the machine to
extract optimal flavor with each brewing.
(Refer to The Grind on Page 22).
15