Operating Your Breville Milk Café; Before First Use - Breville the Milk Cafe BMF600XL Livret D'instructions

OPERATING yOUR BREvILLE MILK CAFé™

BEFORE FIRST USE

Before first use, remove and safely discard
all promotional labels and packing materials
attached to the Breville Milk Café™.
Wash the milk jug, lid and measuring cap
in warm soapy water then rinse and dry
thoroughly. Wipe the exterior of the power base
with a soft damp cloth then dry thoroughly.
FROTHING HOT MILK
1. Place the milk frother on a flat level
surface and plug the power cord
into a 110V-120V power outlet.
The START | STOP button surround
will illuminate.
NOTE
After 30 seconds of non-use, the
milk frother will enter standby mode.
The button surround will cease to
illuminate. To reactivate, turn or
press the START | STOP push-dial.
2. Select the 'Capp' or 'Latté' frothing disc.
Choose the 'Capp' disc for thick and
creamy froth or the 'Latté' disc for
smooth and silky milk.
'Latté'
'Capp'
3. Insert the frothing disc onto the shaft
at the base of the milk jug, ensuring it
is securely attached. Do not operate
the milk frother without a frothing disc
inserted into the milk jug as this can
cause uneven heating.
NOTE
Always ensure the frothing disc is
securely attached to the milk jug
before adding milk.
If the disc is not inserted correctly it
may dislodge during operation.
WARNING
Frothing disc is a choking hazard.
Children must always be supervised
and never left unattended with
the appliance.
11