Solid State Thermostat Control; Control Description - Blodgett AC-500 Manuel D'installation

All manuals and user guides at all-guides.com
1
2
4
AC-500 Gas Oven Shown
Figure 12

Solid State Thermostat Control

CONTROL DESCRIPTION

1. SELECTOR SWITCH --- controls power to the
oven for cook or cool down.
2. LIGHTS SWITCH - controls interior lights.
3. OVEN READY LIGHT --- when lit indicates
burner operation. When the light goes out the
oven has reached operating temperature.
4. SOLID STATE THERMOSTAT - allows an infi-
nite selection of temperatures from 200-500_F
(95-260_C).
5. TIMER --- activates an electric buzzer that
sounds when the cook time expires.
3
OPERATION
1. Turn the SELECTOR Switch (1) to COOK. The
blower and control compartment cooling fan
operate and are controlled automatically by
the action of the doors.
2. Set the SOLID STATE THERMOSTAT (4) to the
desired setting or temperature.
3. Preheat until the OVEN READY LIGHT (3)
goes out.
5
4. Load product into the oven. Determine cook
time and set the TIMER (5).
5. When the buzzer sounds, remove the product
from the oven. Turn the TIMER knob (5) to OFF
to silence the buzzer.
6. Turn the SELECTOR Switch (1) to OVEN OFF.
WARNING!!
For gas ovens complete five minute shut-
down must be observed before the oven
is relighted.
19
Operation