Device Cleaning - FLAEM Aspira 50 Instructions Pour L'utilisation

CLEANING
Switch off the device before any cleaning procedure and unplug the power cable from the socket.

DEVICE CLEANING

Use only a damp cloth with antibacterial soap (non-abrasive and with no solvents of any sort).
COLLECTION CANISTER AND CONNECTING TUBING
• Detach the tube (16) (NOT SUPPLIED WITH THE DEVICE), the manual vacuum flow control (15) and the tubing (14) from
the canister (8). Detach the filter (7) from the canister (8), disconnect the tube (6) both from the filter (7) and from the
device's air inlet (5). Remove the canister from its holder, keeping it upright, and empty it (in the WC at home, in the
biological waste container in the hospital) and clean it, disassembling it as shown below:
STERILISABLE CANISTER
10
10
10
10
10
8
8
8
8
8
10
10
10
10
10
10
8
1. Remove the safety device (.10) from the canister lid (.11)
9
9
10
9
9
9a
9
9
9 9a
2. Remove the float (.10a) from the safety device (.10)
9a
9a
9
9a
9a
9
9
9
9
SINGLE PATIENT CANISTER
10
10
10
10
10
10
8
8
8
8
8
8
9
10
10
10
10
9a
10
10
9
13
9
9
9
9
9
9a
9a
9a
9
9a
9a
9
9
9
9